1、先導方式：內部先導式;

2、滑柱式結構，密封性好，反應靈敏;

3、雙頭電磁閥具有記憶功能;

4、內孔采用特殊加工工藝，磨擦阻力小，啟動氣壓低，使用壽命長;

5、無需加油潤滑;

6、附設手動裝置，利于安裝調試;

7、有多種標準電壓等級可供選用;

8、可與底座集成閥組，節省安裝空間。

1、使用前注意檢查組件在運輸過程中是否損壞,然後安裝使用; 

2、安裝時請注意氣缸流動方向及接管牙型是否正確。使用介質必須經過40um濾芯過濾; 

3、請注意安裝條件是否符合技術要求(如 “電壓”、“作動頻率” 、“工作壓力”、“使用溫度範圍” 等),然後安裝使用; 

4、安裝時注意氣體流動方向,P為進氣口、A(B)為工作口、R(S)為排氣口; 

5、盡量避免在震動的環境下使用,並注意低溫下的防凍措施; 

6、連接管路時,注意止泄帶纏繞不可超過接頭牙端面,注意清除管路接頭內的粉塵、鐵屑等髒物,避免雜質或異物進入閥體內; 

7、請注意防塵,建議排氣口安裝消聲器或消聲節流閥。拆下不用時應在進、出氣口裝防塵套。

8、整機調試時,建議先用手動裝置調試,然後再通電調試。

1, the guide way: internal pilot type;

2, smooth column type structure, good sealing, responsive;

3, double solenoid valve has the memory function;

4, inner hole, using special processing technology, small friction resistance, low starting pressure, long service life;

5, no oil lubrication.

6, attached manual device, to facilitate installation and debugging;

7, are available in a variety of standard voltage grade selection;

8, with base integrated valve group, save installation space.

Installation and use:

1, pay attention to check before use components for damage in transit, and then install and use;

2, please pay attention to when installation cylinder flow direction and to take over the tooth type is correct. You should use a medium after 40 um filter filtration;

3, please note that the installation conditions conform to technical requirements (such as "voltage", "actuation frequency",