[誠信檔案]
產品描述:聚丙烯巨箭jukam g-922 PP專用使用了專門用于PP塑料合成樹脂單組分膠粘劑。
Product Description: Polypropylene giant arrow jukam g-922 PP special use for PP plastic synthetic resin single component adhesive.
Contact Mr. Yu:13416665501
無刺激氣味，環保，無需處理材料表面，粘接后，可在室溫下固化，定位時間適中，粘接強度高！良好的耐候性、耐酸堿性好！而且透明、無色，不影響產品的美觀！常用于PP、塑料、金屬、木材、石材、玻璃、陶瓷、布、皮革等材料的粘接。由于干燥時間適中，涂層性能良好，適用于中、大面積粘接！
No irritation odor, environmental protection, no need to deal with the surface of the material, after bonding, can be cured at room temperature, positioning time is moderate, high bonding strength! Good weather resistance, good acid and alkali resistance! And transparent, colorless, does not affect the appearance of the product! Commonly used in PP, plastic, metal, wood, stone, glass, ceramics, cloth, leather and other materials bonding. Due to moderate drying time, coating performance is good, suitable for medium and large area bonding!
操作說明：步：表面處理：表面處理，首先要去除材料表面的油或灰塵。.
步：施膠：分為單面雙面施膠
施膠兩種：單面膠（膠水要涂上稍微厚厚一層）使兩側加壓緊密！
雙面膠：雙面涂（膠層可涂少許薄層），晾約5-8分鐘，直至手接觸膠體，粘手，但不拉伸合適，然后粘接，壓緊，使兩側緊密貼合
單面雙面涂膠及對比：單面膠可節省膠水，簡化工藝，提高生產效率，但完全固化時間長，比雙面膠粘合強度稍差。
第三步：固化：膠粘劑立即有一定強度，24小時完全固化，可做損傷試驗！
Operating instructions: The first step: surface treatment: surface treatment, first of all to remove the material surface of the oil or dust. The
The second step: sizing: divided into single-sided double-sided sizing
Sizing two: single-sided adhesive (glue to be coated with a little thick layer) so that both sides of the pressure tight!
Double-sided adhesive: double-sided coating (glue can be coated with a little thin layer), dry for about 5-8 minutes until the hand contact colloid, sticky hand, but not stretched properly, and then bonding, pressing, so that both sides close Together
Single-sided double-sided adhesive and contrast: single-sided adhesive can save glue, simplify the process, improve production efficiency, but the full curing time is longer than the double-sided adhesive bonding strength slightly worse.
The third step: curing: adhesive immediately have a certain strength, 24 hours completely cured, do damage test!
【商家簡介】東莞市景舜復合材料有限公司于1993年在東莞大嶺山投資建成，是國內最具競爭力膠粘劑專業制造廠家之一,工廠擁有一批高素質研發團隊及工程技術人員，配備世界先進生產設備。自產品問世以來，營銷全國各地及美、日、歐、中東市場，質高價平的產品優勢深受廣大客戶青睞。 東莞市景舜復合材料有限公司旗下四大品牌：巨箭JUKAM、全能王QNVOR、膠匠JOJON、KEYDAK，所有產品均通過歐美環保認證，應用材質涵蓋：工程塑料,ABS,不飽和聚酯,聚乙烯,聚丙烯,硅橡膠,EPDM,壓克力,橡膠(天然橡膠、丁基橡膠),玻璃（普通...
【溫馨提示】以上是東莞市景舜復合材料有限公司供應的廣告發布--PP板粘聚丙烯PP膠水，巨箭PP塑膠料粘接膠水的詳細信息，歡迎您在驛路商務查看廣告發布的新的價格、廠家、型號、圖片等信息。本頁所展示的信息由企業自行提供，內容的真實性、準確性和合法性由發布企業負責，"驛路商務"對此不承擔任何保證責任。同時鄭重提醒各位買/賣家，交易前請詳細核實對方身份，切勿隨意打款或發貨，謹防上當受騙。如發現虛假信息，請積極舉報。[我要舉報]
粵公網安備 44190002000523號